5 Common Plumbing Issues

5 Common Plumbing Issues – The problem in plumbing can be of any size, shape or level of complication like a running toilet, dripping faucet, major leakage in pipeline or backup of the sewer system, etc.

These plumbing issues can damage your floors, walls as well as the entire property if not noticed or taken care as soon as possible. Some of the most common issues faced in the plumbing system are briefly discussed with their probable solutions in this write-up.

It can help you in identifying the problems in the plumbing system of your home in the future.

You may or may not be able to resolve these issues yourself, depending upon various factors, but this write-up can help you in explaining the problem to the plumber you have called on for this purpose.

Clogged Toilet:

It is one of the most common plumbing issues. Your toilet is clogged if it fills up and fails to drain out. Normally such issues are caused due to a mixture of human waste and paper. You can use a plunger to fix this problem yourself.

You can also use a drain auger or sewer snake for loosening the blockage if the plunger fails to solve this problem.

Drip Faucets:

It is another plumbing issue that might have been experienced by almost every person in his home or office etc. It causes waste of water, surges your water bill as well as irritation if not resolved as soon as possible.

A faucet can normally drip due to the torn off, stiffening, worn out, or dislocation of its internal washer. If you have correct tools then you can easily fix this problem within a few minutes.

Clogged shower or bath drain:

If the sink of your bathroom or the drain of your shower or bath is draining out slowly then there can be some blockage in it due to clogging of soap and hair etc. you will have to handle this problem as soon as possible as it can worsen with time.

You can clear up this blockage by using a sewer snake or plunger. You can also dissolve the clogging by using a mixture of vinegar and baking soda. You can prevent such blockage in the future by catching hair by using a drain guard.

The tips provided here under will help you in using the plunger to unclog your bathroom drain.

• At the edge of the suction pad of the plunger, you should add petroleum jelly to seal the drain more properly

• There must be enough water in the shower to submerge the plunger

• Now plunge it forcefully

Low Water Pressure:

The pressure of water can be low if it does not gush out of your tap. It can be due to worn out, corroded, or broken pipelines. It can also be caused due to deposits of minerals and sediments on the aerators.

In this condition, you can clean the aerator by soaking it in vinegar. If it is due to some problem in the shower then you should either replace the showerhead or soak it in vinegar to clear up its holes.

To clean the showerhead with vinegar you should dismantle it and clean away soap or dirt if any. Now scrub it with a toothbrush soaked in vinegar to loosen minerals deposited on it.

These loosened mineral deposits can be removed from the shower by using a toothpick or a safety pin. To dissolve the leftover deposits you should soak the shower in vinegar overnight.

Faulty Water Heater:

If the water from the heater suddenly goes cold when you are in the shower then there must be some problem in your water heater. Your water heater can stop working properly due to several reasons.

It can be due to not lighting the pilot light, sedimentation in the water tank, or faulty thermostat of the heater. If the pressure of water coming out from your heater is low even then there must be some problem in your water heater.

In such a situation, you must call on a professional plumber to inspect the water heater and fix the problem.

5 Common Plumbing Issues – Conclusion

Thus, you can experience a number of most common issues faced by you in the plumbing system of your household in your day-to-day life. The information provided in this write-up can help you in identifying them and encourage you to resolve them as soon as possible.